Precautions for plastic crushing mixer

Release time:

2024-04-12

Source:

Why is it necessary to install grounding and leakage protection devices for the plastic mixer unit? Because this can further enhance the personal safety of the staff; When the plastic mixer machine starts running, plastic mixer hands, wooden sticks, and iron horses are strictly prohibited from entering the machine. Construction personnel should pay attention to opening the machine maintenance door;

When there is a blockage problem at the feeding port of the plastic mixer, it is particularly important not to forcefully feed materials such as hands, wooden rods, and iron rods. The machine can be paused until the feeding port is cleaned before continuing to work; When the plastic mixer is gradually running, be careful not to start the unit under load. When the machine is running normally, adjust the control plug to the appropriate position, and the main and auxiliary materials should be evenly fed, subject to the motor not exceeding the load; When replacing screens with a diameter less than 4 millimeters, the feeding plug plate set on the feeding pipe should be adjusted appropriately. Otherwise, excessive feeding can easily jam the grinding disc, damage the bottom of the screen, burn out the motor and electrical components, etc; The unit should be installed in a place away from fire sources, ventilated, and transparent.

Introduction to the working principle and structure of a horizontal plastic mixer

Operation content of plastic mixer