The operating principle and characteristics of a large horizontal plastic mixer

Release time:

2024-04-12

Source:

A plastic mixer is determined by multiple parameters, and it is impossible to describe a mixer with any single parameter. In the mixing tank, the way to make the micro clusters collide with each other is to provide sufficient shear rate. From the perspective of stirring mechanism, it is precisely due to the existence of fluid velocity difference that the layers of the fluid mix with each other. Therefore, any stirring process always involves the fluid shear rate. Through the study of shear rate distribution, it is shown that there are at least four shear rate values in a stirring tank, which are: experimental research shows that in the blade area, regardless of the type of slurry, the large shear rate and the average shear rate increase with the rotational speed when the blade diameter is increased. But when the speed is high, the relationship between the large shear rate and the average shear rate with the blade diameter is related to the blade shape. When there are multiple capacity specifications for customers to choose from: the main models of this series are composed of stainless steel U-shaped barrel body, frame, transmission motor, mixing blade shaft, heating device, dehumidification device, and electric control box components. The main performance of Shandong plastic mixer:
1. The heating and drying type adopts a double-layer U-shaped barrel design, and the inner wall is made of all stainless steel, which is easy to clean and avoids rust;
2. Using thermal oil as the heating medium, the heat is uniform and easy to control;
3. All stainless steel shaft and "S" shaped paddle blades, mixing materials quickly and evenly;
4. Cycloidal pinwheel reducer, with long service life and low noise;
5. Drying and mixing in one, turn off the "heating switch" to use for material mixing and homogenization;
6. Purchase a spiral feeding machine as a supporting device, eliminating the need for a feeding platform, which is fast and convenient;
7. Manual or pneumatic discharge ports can be made according to customer requirements.

Plastic mixer operation, installation, performance, and maintenance instructions

Introduction to the working principle and structure of a horizontal plastic mixer